how to remove stickers from bike

How to Remove Stickers from Bikes

posted in: Blog 0

Most people get annoyed with numerous stickers and decals on the bikes. It is possible to remove various cycles without scratching or removing paint. If you use suitable methods and tools, you can achieve it. It depends on the type of sticker and the paint on the bike surface when removing a sticker.

Since these stickers are made from vinyl or paper, it is easy to remove with tools and little effort; however, before you plan to remove stickers, it is necessary to check if sticker removal is legal in your state. You can also consider taking a photo of the sticker because it may have vital information not in the manual.

Without much ado, let’s explore more about sticker removal on different bike parts.

What you need to Remove Stickers from your Bike

  • Heat gun/ hair dryer
  • Plastic scraper
  • Microfiber towel
  • WD-40 spray
  • Goo Gone

How to Remove Stickers from Bike at Home

WD40 spray
The first thing is to spray the sticker with a WD40 and let it soak for a minute. A citrus degreaser can also be used to remove the adhesive. Avoid using solvents because they may remove the paint.

Heating the sticker
It is recommended to use a hairdryer to heat the sticker. However, use the lowest setting to prevent it from melting and destroying the paint. Don’t use heat guns since they tend to be too hot.

Use fingernail or plastic razor blade
After heating the sticker, use your fingers or plastic razor to lift one edge of the sticker. It will be pleased how it peels off the surface. Don’t use sharp tools like a knife and metal razor blades that may damage the paintwork.

Clean the surface
After the sticker is off, apply paint polish, WD40, or tea tree oil to remove the adhesive remains.

Steps by Step of Removing Stickers from the Bike Fuel Tank

Use a blow dryer
The first thing is to warm the adhesive that sticks the decal or sticker to the fuel tank. Make sure you heat the sticker and around it. Don’t use a hot air gun since it is very hot and can lead to the paint fading off. You need to warm up the sticker of effective results.

Use WD40 or Goo Gone
After heating the sticker, spray WD40 on the sticker and its surrounding. Give it 1-2 minutes for the spray to soak. Don’t use solvent since it can remove the fuel tank paint.

Peeling off
Now, use your fingernails to remove the sticker from one side. Don’t use sharp objects like razor blades or knives to peel as they can dent the bike’s body. Be patient enough as it takes some time to peel. In case the sticker tears up at some parts, don’t worry; apply WD40 or eraser to wipe it out.

How to Remove Stickers or Decals from Helmet

If you aren’t happy with your helmet with stickers or decals, you can remove them instead of buying a new one. However, you need to keep in mind for great results. Some stickers tend to be tougher than others to remove. It all depends on the quality of the sticker. Another factor is time. A sticker that is adhered to for years will be tougher than recent applied ones. Despite that, it is possible to get rid of the sticker. Don’t use solvent-based liquids as it damages the paint and reduces the safety of the helmet.

Here are different techniques to remove helmet stickers

Plastic knife, razor blade, and credit card
Depending on the stickiness of the sticker, you can use an old credit card, razor blade to lift one side of the sticker; hence you can grip it easily. Slowly start peeling the decal from the helmet. Don’t pull it too fast to avoid tearing into smaller pieces that are hard to peel.

Vinegar
Warm a cup of vinegar; it shouldn’t be too hot to handle with your bare hands. Pour the vinegar in a rag or paper towel and rub the sticker. Ensure it soaks for 5 minutes to get into the decal edges to come out in contact with the adhesive. Now, slowly peel the sticker. You need to repeat the process before completely removing the sticker.

Use fishing line
You can use a fishing line if the sticker tends to be stubborn. Are you wondering how it works! You need to tie up the line around the index fingers while tightly held. Carefully pull the line under the decal edges; hence cut through the adhesive and remove easily.

Heat
You can also consider the use of a hairdryer to remove a sticker from the helmet. Make sure the heat isn’t hot enough to melt the helmet while decreasing its safety. Use the lowest heat settings to direct onto the sticker for some minutes. The heat helps soften the sticker’s adhesive to peel it using a fishing line, plastic razor, credit card, or fingers.

Removing Stickers from Bike Frames

You don’t need any unique tools required to remove the stickers on the bike’s frame. However, avoid using a metal razor blade to prevent cutting yourself and also damaging the paintwork. These are steps for removing stickers:

Use a plastic razor blade.
Since the frames have a lacquer coating, you need to remove the layer first to peel off the stickers. Use the razor blade or scraper to cut the coating to access the stickers. Now, it is easy to remove the sticker because of the low stickiness strength. Use a scraper to get the decals off the bike frame.

Whizzy wheel
You can prefer a whizzy wheel if the sticker covers a larger area, although it takes some time. You need to move the wheel whizzy slowly forward and backward as it takes off the stickers. After taking off the stickers, you need to reapply a lacquer coating to protect the frames from harsh weather.

Removing Sticker from Bike Side Mirror

When removing stickers from the side mirror, you need to be careful when using a sharp razor blade as it leaves scratches and marks. You can use a plastic scraper or credit card. Here is how to do it:

Window cleaner
Use window or glass cleaner spray to assist in removing the stickers. Let the spray soak for a minute, then use a towel to rub the sticker until it peels off. If the sticker is fully attached, you can use a sharp razor blade to peel the window.

WD-40
Although WD-40 is used as a lubricant, you can also use it to remove stickers. It helps to remove the adhesive that remains after removing the stickers. You are required to spray it onto the area. Let it soak for minutes to soak to the adhesive, and use a wet cloth to wipe it off.

Rubbing Alcohol
You also rub alcohol, also called isopropyl, to remove a sticker from the bike side mirror. Apply the alcohol on the sticker and let it dry. Once dry, you can use a plastic scraper or bank card to peel the sticker off.

Adhesive Remover
You can use the adhesive remover designed to remove sticky remains. You need to spray the remover onto the sticker, give it some time to soak into the adhesive then peel the sticker off. You don’t require any tool.

Ice
Another method of removing stickers from the side mirror is to freeze it for the adhesive to loosen and become easy to remove. You can use ice cubes in a bag and hold them against the sticker for some minutes. The sticker will freeze, then use a razor blade to lift one edge of the sticker to peel it completely.

How to Remove Stickers from Bike Wheel

Some stickers are easy to remove, while others are tough. These methods will help you to remove adhesive easily. You need to have Goo Gone or 3M Adhesive remover and a microfiber towel. Spray the remover on the wheel and let it soak for a few minutes. Apply less effort to avoid scratching the wheel surface while removing the sticker. Use the towel to wipe the residue that builds up while peeling off the adhesive.

If the stickers occupy a large area, it becomes hard to remove them with just chemicals. You need to use a plastic razor blade or scraper to scrape off the sticker before applying an adhesive remover gently. However, you need to be careful not to use a metal razor blade that may scratch the wheel finish.

How to Remove Stickers from Bike Plastic

Getting the adhesive remains from the bike can be annoying. Here are steps to make your sticker removal process simple and easy. You will need:

  • A plastic scraper
  • Warm soapy water
  • Clean cloth
  • Nail polish remover or vinegar
  • You need first to remove the stickers with a plastic scraper to avoid scratching the surfaces. This makes removing the adhesive easier.
  • Soak the wipe off the sticker adhesive with warm soapy water. Vinegar and nail polish remover effectively removes the stains.
  • Pour the solution into a cloth and apply it to the adhesive sticker area. Allow it to soak for about 15 minutes.
  • Use a dry cloth to remove as much glue as possible
  • Use a plastic scraper, credit card, or fingernail to scrape off any remaining adhesive. You need to be careful not to scratch the plastic surface.
  • Clean up with warm soapy water and dry it after the entire residue has been removed.

How to Remove Stickers from Rims

  • You need to sand the rim with 400-800 grit sandpaper till all the stickers are removed.
  • Spray clear coating of glossy finish paint.
  • Heat the rims at a temperature of 85c for about 70 minutes.

Final Thought

As stated in the article, there are various ways of removing stickers used on different bike components, including a fuel tank, rim, frame wheels, and plastic vendor. The sticker quality and bike coating influence the effectiveness of a method. The most commonly used tools include a hairdryer and a plastic razor blade.

If the stickers are tough for you to remove, you can seek professional assistance to avoid damaging the bike surfaces.

Leave a Reply

Your email address will not be published. Required fields are marked *