There are numerous choices available. It takes a lot of time and effort to select the best one. So, in this article, we have a review of the top products. Each has a ton of fantastic functions that will make your life a little bit simpler. By doing this, you can be sure that you’re getting the best 3d printer with raspberry pi for your needs while saving the most money.
How we choose
We spent hundreds of hours researching various products to determine which of these 3d printer with raspberry pi exhibits the highest performance and functionality. To generate precise numbers, we collected data from various metrics. These products were evaluated using our rating metrics. Before making your purchase, you should consider the potential difficulty of the tasks you will use as one of these 3d printer with raspberry pi. Depending on your needs, one feature or function may be crucial to you while being useless to others. Because of this, we’ve compiled a list of the top products below so you can pick the one that best suits your requirements. We selected these 10 products using several research metrics, including:
- Brand value
- Consumer ratings, reviews & many more
10 Best 3d printer with raspberry pi on The Market
There are a lot of 3d printer with raspberry pi on the market, but not all of them are equal in terms of quality. If you’re looking to buy a new one, you’ll want to know what features to look for.
We’ve compiled this list to help you find the best 3d printer with raspberry pi for your needs. We’ve also included some helpful information about how each 3d printer with raspberry pi works and what it can do (or not do).
In this article, we will be looking at some of the best 3d printer with raspberry pi reviews. These are reviews that can help you decide which 3d printer with raspberry pi to invest in and which ones not to waste your money on.
- Search ASIN B088BGN5HC B088BLZKRG to get the tripod and CS Lens for Raspberry Pi High Quality Camera
- Natively compatible with all Raspberry Pi A&B series board, camera module and display.
- Works great for a “stealth” black look, goes well with 3D printers OctoPrint setup and Raspberry Pi High Quality Camera
- Used on OctoPi, Raspbian, MotionEye for 3D printer monitoring, surveillance camera or other Pi cam projects.
- 100cm/3.28ft length, 15 Pin 1.0mm Pitch interfaces, longer than the standard Rpi camera cable, especially useful when you don't want to place the camera near the Raspberry Pi.
- ✨ID design is newly upgraded. It adopts the Raspberry Pi board frame, which is perfectly installation with Rasberry Pi to save internal space. The appearance and performance coexist. It is the coolest choice for Voron players.
- ✨Chip capacitors (MLCC) of the main control board are all Murata capacitors; well-known brand capacitors, with guaranteed quality and better experience.
- ✨Fuse adopts the form of "fuse holder + fuse", which is easy to disassemble; the lateral design of the main control board seat perfectly matches the space characteristics of Voron V0 machine that needs to fix the main board vertically.
- ✨Using Raspberry Pi ARM Cortex-M0+ main control RP2040 microprocessor. This controller board onboard UART mode of TMC2209 and supports Klipper firmware.
- ✨BIGTREETECH SKR Pico V1.0 main control board heat sink design is newly upgraded, the heat dissipation area is enlarged, and the heat dissipation performance is greatly improved, which is both beautiful and practical.
- Used on OctoPi, Raspbian, MotionEye for 3D printer monitoring, surveillance camera or other Pi cam projects
- 5MP camera module for 3D printer projects with Raspberry Pi, natively compatible with the official Raspberry Pi camera modules and motherboards
- 100cm/3.28ft extension cable included, long enough for mounting the camera, especially useful when you don’t want to place the camera near the Raspberry Pi
- Package includes 2 flex ribbon cables (15cm/100cm) for Raspberry Pi A&B series. Cable for Pi zero is not included. Search ASIN B087FDJ2RP to get 100cm extension cable.
- Work on raspicam commands and python scripts as you would expect for a new project or drop-in replacement
- 【High Performance Chip】BIGTREETECH Octopus Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz.Supports running Klipper and Marlin.
- -【Multiple DIY Ports】Interfaces with a Raspberry Pi using emulated serial over USB or direct UART to any of the serial ports on the board；Supports up to 4 hotend heaters;Provides separate power inputs for motors, bed heating and logic/fans/hotends.Up to 6 PWM fans and 2 always-on fans with the ability to individually select the voltage rail that will drive each fan.
- 【Wide Compatibility】Supports all versions of BIGTREETECH TFT screens and LCD12864 screens;Support TMC2209/TMC2208/TMC5160 and other step silent drivers;Supports multiple languages such as English and Simplified Chinese and can easily switch between different languages ;Provides an RGB LED interface.
- 【Flyback protection on PWM fan ports 】Many people find that their fan ports become damaged after some time when using larger fans. This is because of the inductance in the fan coils. The octopus includes flyback protection on each fan port which will protect the FETs from damage caused by turning the fans on and off.
- 【Efficient heat dissipation】Uses high-performance MOSFETs to increase heating efficiency while also reducing heat generation on the motherboard. Up to 6 PWM fans and 2 always-on fan,it can speed up the cooling of the motherboard.
- HD resolution, the night vision camera is capable of 2592*1944 pixel static images, and also supports 1080P 30fps, 720P 60fps and 640*480P 60/90fps video recording
- Compatible with all series, fit for Raspberry pi 4, Pi 3 B+ with 100cm FFC Camera Cable, and match 30cm FPC Cable for Pi Zero, also can works with your 3D printer to observe the Print progress
- Better low light performance, IR corrected lens to reduce focus shift at night, and IR LED illuminator to improve the lightning condition
- New design Acrylic holder case make sure your pi camera is more stable and flexible, the case reserve the hole for heat-sink, IR led and screws hole, Easy to adjust the filming angle and install the screws
- Typical usage scenarios, Home security and surveillance, motion detection, 3D printer observe, time-lapse photography and other Raspberry Pi camera projects
- 【Realize Online Printing】Interfaces with a Raspberry Pi using emulated serial over USB or direct UART to any of the serial ports on the board, to realize Klipper Firmware and Raspberry Pi Online Printing.
- 【Strong DIY Support】This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total; And up to 6 PWM fans and 2 always-on fans with the ability to individually select the voltage rail that will drive each fan. Select from Vin, 12V or 5V.
- 【Main Control Chip】Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz.
- 【Increase Protection Function】Uses high-performance MOSFETs to increase heating efficiency while also reducing heat generation on the motherboard. Supports “print from SD card” and “print via USB OTG” using the integrated USB-A port.
- 【Motherboard Expansion Function】Support BLTouch, locked-rotor detection, shutdown after printing, resume printing after power failure, CAN bus, U disk function, IIC expansion; at the same time reserved WIFI interface, PT100 thermistor interface (optional, Only reserved interfaces, customers need to purchase chip welding, please pay attention.), dual Z-axis printer.
- Type: SD to Micro SD Card Extension Adapter.Support the card 32G,easily make your navigation upgraded,much more convenient for your life.
- Fast Reading Speed:LANMU SD Card Extension never affect the read and write speed of your machine,keeping it effficient and safe.
- Universal Compatibility:Widely compatible with GPS, DVD, DVR, LED/LCD screen,mobile phones,Raspberry Pi and reality 3D printers,such as CR-10,Ender 3 Pro, Ender 3,Ender 3 V2,Ender 5,Anet A8,Anet A6, MonoPrice and more.(Note:If the micro sd end is locked, it will make a "click" sound. Please check it before printing.If you wanna change the card, please firstly unplug the micro sd card, change the new card,then plug the micro sd card to the printer slot again.)
- Premium Materials:Micro SD to SD Card Extension Cable is made of High-quality Plastic & FFC.18.9in length design make it flexible and long enough to extend and read your SD cards.
- Warranty:LANMU provides lifetime warranty and friendly after-sale service including 30-day unconditional money back and 180-day free replacement if receiving defective items,making sure the risk-free shopping experience for you.
- Features: Featured with Raspberry Pi ARM Cortex- Mo+ MCU PR2040 Dual-core processor, No need to power the hotbed separately, Low power consumption, with excellent performance. With Raspberry Pi board frame,optimal size design, can stack and communicate with Raspberry Pi via TYPE-C, UART to save internal space.
- How to set the hardware: search FYSETC_R4 on github to get more details. Other basic Parameter: Power input: DC12/24V; Logic Voltage: 3.3V ; Motor drive interface: X Y Z E; 3-way 100K NTC to control the temp of hotend throat/hotbed/cavity; with 6 limit switches better limit printing route.
- Mute printing: Uart mode of onboard mute TMC2209 stepper moter driver*4pcs, support Klippe firmware, not support marlin.
- Optimized Heat Dissipation: Upgrade the design of the heat sink and increase the heat dissipation area, with 3 cooling fans design and Laser PWM.
- Compatiblity: our R4 V1.0 Super Mini Controller Board Tailored for Vorn V0 V0.1 printer. Size:86*48mm, more compact and lighter than other V0 boards , a perfect fit.
- Type: Micro SD to SD Card male to female Extension Adapter.
- Universal Compatibility: Widely compatible with GPS, DVD, DVR, LED/LCD screen, mobile phones, Raspberry Pi and reality 3D printers, such as CR-10,Ender 3 Pro,Ender 3,Ender 3 V2,Ender 5,Anet A8,Anet A6, MonoPrice and more.(Note:If the micro sd end is locked, it will make a "click" sound to remind you. Please check it before printing.If you wanna change the card, please firstly unplug the micro sd card, change the new card,then plug the micro sd card to the printer slot again.)
- Premium Materials: Micro SD to SD Card Extension Cable is made of High-quality Plastic & FFC.5.9in length design make it flexible and long enough to extend and read your SD cards.
- Support the card 32G, easily make your navigation upgraded, much more convenient for your life.
- Fast Reading Speed: LANMU SD Card Extension never affect the read and write speed of your machine, keeping it efficient and safe.
- ❤【High resolution】This 5 inch LCD touch screen with a resolution of 800*480 and a display area of 108x64.8mm.
- ❤ 【5-point touch】 It Supports Raspberry Pi DSI display interface, comes with a capacitive touch panel, and supports 5-point touch.Capacitive Touch Control ,better touch response,faster response time.
- ❤【24 MONTHS LONGER WARRANTY】Thank you very much for your choice and trust. If you have any questions about the product, can you contact us first? Give us the opportunity to understand your needs, and we will do our best to answer questions and solve problems for you.
- ❤ 【Easy to install】The unique hole design on the back allows you to install the Raspberry Pi directly.The display adopts Raspberry Pi power supply design, without external power supply.
- ❤【Wide range of applications】 5 inch capacitive Touch Screen designed for for pi 4 model B /pi 3 model A+ B+ B/pi 2 model B/pi 1 model B+ A+.
Things to Consider When Buying 3d printer with raspberry pi
When it comes to buying 3d printer with raspberry pi, there are a few things that you should keep in mind. Not just any product will do, and not just any price is worth paying. The following tips will help you buy the right product at the right price.
- Is it worth it? The first thing you should do is decide whether it’s worth buying at all. Look at your budget and decide what you can afford. If the price is too high, then it probably isn’t worth it.
- Do I need this? Sometimes, when we see something new and exciting, we get carried away and buy something without thinking about whether or not we need it. If you have doubts about whether or not you need something, don’t buy it until you’ve had time to think about it and talk with someone else who can also give their opinion!
- Is there a better option out there? Another thing to consider is whether or not there are other options out there that might be better suited for your needs than the one that caught your eye initially. While the first thing may be pretty or flashy, there could be something else that would work just as well, if not better, at a lower cost, so don’t be afraid.
- Is there a warranty? If a product has a warranty, it’s made well enough to last for years. If not, then you can expect to either buy replacements or spend time fixing broken parts yourself.
Buying a product that doesn’t meet your needs can be frustrating and expensive. Before you buy, make sure you consider the following:
This is probably the most important factor when buying 3d printer with raspberry pi. The price of a product is usually determined by its quality and brand name, but it can also depend on other factors, such as supply and demand in the market. The higher the demand, the higher the price for an item.
This refers to how durable an item is and whether or not it will last long enough for your needs. Quality products are more expensive than those not made well because they are more durable and will last longer without needing maintenance or repairs.
Look at reviews from other customers to see how long the 3d printer with raspberry pi has lasted, especially if it’s something like 3d printer with raspberry pi that will often be used over time. Ask yourself whether it’s worth paying more for something durable rather than replacing it after just a few months or years of use because it broke down quickly or was cheaply made from low-quality materials that failed unexpectedly.
Check user reviews
A great way to get unbiased opinions about 3d printer with raspberry pi is by reading reviews from other consumers who have bought them. User reviews are an excellent source of information because they’re written by people who use the product, not just someone trying to sell it to you. They also provide useful information about what to expect from a particular product, so you know whether or not it’s worth buying.
Know what you want
You can’t expect to find 3d printer with raspberry pi just by looking randomly around. You need to know what you’re after before you start shopping. Make a list of features, functions, and price ranges that match your needs, then shop around until you find something that matches your criteria.