Trying Out The Best 3d Printer Controllers For Your Need

In the world we live in today, information overload is commonplace. Everyone has access to a wide variety of shopping options. As a result, picking the best 3d printer controllers can be difficult. There are numerous product alternatives available. Additionally, remember that not all businesses act in your best interests. Due to this, we’ve chosen to examine the most widely used and frequently bought 3d printer controllers. We want to list the top ten options.

There are numerous choices available. It takes a lot of time and effort to select the best one. So, in this article, we have a review of the top products. Each has a ton of fantastic functions that will make your life a little bit simpler. By doing this, you can be sure that you’re getting the best 3d printer controllers for your needs while saving the most money.

How we choose

We spent hundreds of hours researching various products to determine which of these 3d printer controllers exhibits the highest performance and functionality. To generate precise numbers, we collected data from various metrics. These products were evaluated using our rating metrics. Before making your purchase, you should consider the potential difficulty of the tasks you will use as one of these 3d printer controllers. Depending on your needs, one feature or function may be crucial to you while being useless to others. Because of this, we’ve compiled a list of the top products below so you can pick the one that best suits your requirements. We selected these 10 products using several research metrics, including:

  • Size
  • Brand value
  • Features
  • Style
  • Design
  • Longevity
  • Price
  • Warranties
  • Types
  • Specifications
  • Durability
  • Quality
  • Materials
  • Consumer ratings, reviews & many more
Top Picks: 10 Best 3d printer controllers

10 Best 3d printer controllers on The Market

There are a lot of 3d printer controllers on the market, but not all of them are equal in terms of quality. If you’re looking to buy a new one, you’ll want to know what features to look for.

We’ve compiled this list to help you find the best 3d printer controllers for your needs. We’ve also included some helpful information about how each 3d printer controllers works and what it can do (or not do).

In this article, we will be looking at some of the best 3d printer controllers reviews. These are reviews that can help you decide which 3d printer controllers to invest in and which ones not to waste your money on.

Bestseller No. 1
BIGTREETECH Octopus V1.1 Control Board 32bit Compatible TFT Series Touch Screen, Support DIY Klipper Firmware and Raspberry Pi Online Printing for Voron V2.4 3D Printer (with BLtouch+80cm Cable)
  • 🐙【Increase Protection Function】Uses high-performance MOSFETs to increase heating efficiency while also reducing heat generation on the motherboard. Supports “print from SD card” and “print via USB OTG” using the integrated USB-A port.
  • 🐙【What You Can Receive】BIGTREETECH Octopus V1.1 Motherboard*1, Type C Cable*1, BLTouch Auto Leveling Sensor*1, 80cm Extension Cable*1, Rubber Duck*1, Exquisite Packaging Box*1.
  • 🐙【Strong DIY Support】This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total; And up to 6 PWM fans and 2 always-on fans with the ability to individually select the voltage rail that will drive each fan. Select from Vin, 12V or 5V.
  • 🐙【BLTouch Auto Leveling Sensor】BLTouch is an auto leveling sensor for 3D Printers based on open-source.Simple, Smart, High-precision.It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
  • 🐙【Main Control Chip】Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz.
Bestseller No. 2
BIGTREETECH Upgraded SKR Mini E3 V3.0 Silent Board 32bit Mainboard Integrated with TMC2209 Stepper Driver Support Marlin/Klipper Firmware Compatible with Ender V2 Ender 3 Pro/5 3D Printers
  • 🌟【TMC2209 Drivers】SKR MINI E3 V3.0 mainboard adopts ultra silent TMC2209 stepper motor driver, it generates lower heat and it has a large-area cooling position to lower the temperature when driver working. Meanwhile, it adopts stealthChop2 Mute technology which reduces motor noise to the point of silence at low velocities to ensures noiseless operation, maximum efficiency and best motor torque.
  • 🌟【Multiple Functions】It Supports BLTouch, RGB lights, blocking detection, shutdown function. What ’s more, it also supports TFT35 E3 V3.0/TFT35 V3.0/TFT28 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer.
  • 🌟【Firmware Update】Compatible with Marlin and Klipper firmware. Firstly download firmware on GitHub website of SKR MINI E3 V3.0 motherboard,copy and save it to SD card , firmware must bed reserved, then re-plug the SD card and wait to 10s. The n firmware has been successfully updated. Note: Our control board come without SD card.
  • 🌟【Superior Heat Dissipation Performance】New Upgraded SKR MINI E3 V3.0 main board is equipped with a large Aluminum heat sink of stepper motor driver instead of pieces small heat sink, this design is able to increase the heat dissipation performance of the motherboard by 20% which greatly strengthen the heat dissipation capacity of the driver totally.
  • 🌟【High Compatibility】SKR MINI E3 V3.0 Control board compatible with Ender V2 Ender 3/ende 3 pro/ender 5/ender 5 pro/CR-10 3D printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs.
Bestseller No. 3
3D Printer Controller Kit RepRap, RAMPS 1.4 + 2560 Board + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display 3D Printer Controller Kit
  • RAMPS 1.4: RAMPS interfaces an for Arduino with the powerful for Arduino platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an for Arduino shield for easy service, part replacement, upgrade-ability and expansion. for Additionally, a number of for Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
  • LCD 12864 with Controller: This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the "smart adapter" included.
  • Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it is powered isasking for trouble.)
  • 2560 control board: The board is a microcontroller board based on the 16AU .It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
  • A4988 driver module: A4988 Stepper Motor Driver Board is a breakout board for Allegro?ˉs A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection; please read the A4988 datasheet carefullybefore using this product.
Bestseller No. 4
BIGTREETECH SKR Mini E3 V2.0 Control Board 32Bit New Upgrade for Creality Ender 3, with TFT35 E3 V3.0 Graphic Smart Display Controller Board 3D Printer Parts
  • 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip;Integrate UART mode of TMC2209 to simplify debugging of motherboard and driver.Reserve expansion ports for TMC2209 pins to facilitate users to use DIAG instead of Endstop.
  • 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.)
  • 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz; Upgrade the firmware by SD card. It is easy and convenient to operate.
  • 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen mode;Serial port screen mode supports two printing modes: SD card and U disk.
  • 【After-sales Support】If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales personnel to solve your problems; Thank you for your support.
Bestseller No. 5
BTT Octopus V1.1 32Bit 3D Printer Controllers Supports Klipper and Marlin, Compatible TMC2209/TMC2208/TMC5160/TFT35 E3 V3.0/PI TFT50/BL Touch and Compatible Raspberry Pi Voron 3D Printer ect
  • 【Flyback protection on PWM fan ports 】Many people find that their fan ports become damaged after some time when using larger fans. This is because of the inductance in the fan coils. The octopus includes flyback protection on each fan port which will protect the FETs from damage caused by turning the fans on and off.
  • 【High Performance Chip】BIGTREETECH Octopus Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz.Supports running Klipper and Marlin.
  • 【Wide Compatibility】Supports all versions of BIGTREETECH TFT screens and LCD12864 screens;Support TMC2209/TMC2208/TMC5160 and other step silent drivers;Supports multiple languages such as English and Simplified Chinese and can easily switch between different languages ;Provides an RGB LED interface.
  • -【Multiple DIY Ports】Interfaces with a Raspberry Pi using emulated serial over USB or direct UART to any of the serial ports on the board;Supports up to 4 hotend heaters;Provides separate power inputs for motors, bed heating and logic/fans/hotends.Up to 6 PWM fans and 2 always-on fans with the ability to individually select the voltage rail that will drive each fan.
  • 【Efficient heat dissipation】Uses high-performance MOSFETs to increase heating efficiency while also reducing heat generation on the motherboard. Up to 6 PWM fans and 2 always-on fan,it can speed up the cooling of the motherboard.
SaleBestseller No. 6
MKS Gen L V2.1 3D Printer Integrated Motherboard Controller PCB Board A4988/DRV8825/TMC2208/TMC2130 Like Ramps 1.6 MKS Gen V1.4 Mainboard
  • Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS.
  • Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable.
  • TFT24/28/32/35 & Available to connect external large stepp drivers Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently.
  • Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly.
  • Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces.
Bestseller No. 7
BIGTREETECH SKR 3 EZ Mainboard Silent Motherboard 48V High Speed Printing Support Marlin &Klipper Firmware Compatible with EZ2209 EZ5160 TMC5160 TMC2209 Driver for 3D Printer DIY Control Board
  • ☆【Safe Anti-misplugging Design】Wrong installation of drivers will not only cause damage to the drivers itself but even ruin the motherboard or catch fire. And according to our survey, 40% Users may misplug the drivers unintentionally. Our new arrivals SKR 3 EZ motherboard and EZ series drivers, featuring an unprecedented anti-misplugging design, can totally remove such hidden dangers to offer you a better and safer printing experience! (Traditional TMC drivers is still compatible.)
  • ☆【About Firmware】SKR 3 EZ silent board compatible with three firmware Marlin, Klipper and RepRap, which are widely used in the 3D printing world. Firstly download firmware on GitHub website of name “firmware.bin”, copy and save it to SD card, firmware must bed reserved, then re-plug the SD card and wait to 10s. When the status indicator stops flashing and the file name in the SD card is renamed to “FIRMWARE.CUR” then update successfully. Note: Our control board come without SD card.
  • ☆【DIY Friendly Interfaces】BOOT0 is added for programming firmware in DFU mode. WIFI module (ESP-12S, ESP-07S, ESP32) is reserved. SKR 3 EZ motherboard also supports bltouch, resume printing function, RGB lights, blocking detection and shutdown after printing function. What’s more, it’s also compatible with TFT35 E3 V3.0/TFT35 V3.0/TFT28 V3.0/12864 LCD display as well as EZ2209/EZ2208/EZ5160, TMC2209/TMC2208/ TMC5150/DRV8825 stepper motor drivers.
  • ☆【Updates of Processor】The new processor of SKR 3 EZ controller is upgraded to 32-bit 480MHz ARM Cortex-M7 series STM32H743VI, with which the running speed and printing accuracy of SKR 3 controller is greatly increased by 30%+ while its working noise become lower. Its upgraded thermistor supports PT1000, exempting the need of external module.
  • ☆【48V High Speed Printing】Motor voltage of SKR 3 EZ varies from 12V to 48V (need to use EZ5160 Pro driver for 48V) while SKR 3 varies from DC 12V to 24V. Higher voltage can extremely improve your printing speed and you can adjust it with a jumper cap. What's more, SKR 3 owns 2 normal fans, and the EZ version owns 3 normal fans, which can ensure the smooth operation of your printer and advance your printing quality.
Bestseller No. 8
3D Printer CNC Controller Ardiuno CNC kit with for ArduinoIDE,Longruner GRBL CNC Shield Board+RAMPS 1.4 Mechanical Switch Endstop DRV8825 A4988 Stepper Motor Driver Nema17 Stepper Motor LKB02,Black
  • ★ Premium Quality ★ Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of application.
  • ★ Latest CNC Shield Expansion Board V3.0 ★-CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible with for ArduinoIDE, GRBL 0.9.
  • ★ Good after-sales service. We'll respond within 24 hours for any questions.
  • ★ Professional 3D printer CNC Kit ★ This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great assortment set for starters and professionals.
  • ★ DRV8825 Stepper Motor Driver with Heat Sinks ★ High quality stepper motor drive with 4 Aluminum Cooler, running within 2.5A current (Maximum), compatible with for ArduinoIDE software and hardware.
Bestseller No. 10
BIGTREETECH Octopus V1.1 32bit Control Board + TFT35 E3 V3.0.1 Touch Screen Display + 8xTMC2209 V1.2 Stepper Motor Driver DIY for Voron V2.4 3D Printer Controller Board Support Klipper Raspberry Pi
  • ⭐MULTI-FUNCTION DISPLAY: TFT35 E3 V3.0.1 touch screen has higher compatibility. You can choose two working modes: UART serial screen mode and 12864 screen mode. The WIFI port is reserved, and the WIFI function is implemented by an external WIFI module.SD card update firmware is simple and convenient, download from our github, copy and save to SD card
  • ⭐SUPER PERFORMANCE CHIP: BIGTREETECH Octopus control adopts 32-bit ARM-level Cortex-M4 series STM32F446ZET6 chip with a frequency of up to 180MHz, and supports 8 stepper motors. Equipped with highly modular open source firmware Marlin2.0, which greatly improves the overall performance of the motherboard, and all the functions of the motherboard do not require any expansion modules, and supports running Klipper and Marlin firmware
  • ⭐ULTRA-QUIET DRIVER: TMC2209 v1.2 with SpreadCycle technology, enables high precision cycle-by-cycle current control for the highest dynamic motion. Large area thermal pad to reduce the temperature of the drive during operation. The motor is difficult to lose step. Can prevent motor vibration. The module supports STEP/DIR and UART modes.
  • ⭐WORRY-FREE AFTER-SALES SERVICE: Do you have any questions? Or if you have any problems that need to be solved, please feel free to contact us, and we will arrange the most professional technical team to solve it for you until you are satisfied.
  • ⭐SUPER MULTI-FUNCTION CONTROL PANEL: Support material interruption detection, continuous printing after power failure, shutdown after printing, BL_Touch, support online printing, etc. Upgrading the configuration firmware through the SD card, the operation is simple, convenient and efficient. Using high-performance MOSFET, the heat dissipation effect is better.

Things to Consider When Buying 3d printer controllers

When it comes to buying 3d printer controllers, there are a few things that you should keep in mind. Not just any product will do, and not just any price is worth paying. The following tips will help you buy the right product at the right price.

  • Is it worth it? The first thing you should do is decide whether it’s worth buying at all. Look at your budget and decide what you can afford. If the price is too high, then it probably isn’t worth it.
  • Do I need this? Sometimes, when we see something new and exciting, we get carried away and buy something without thinking about whether or not we need it. If you have doubts about whether or not you need something, don’t buy it until you’ve had time to think about it and talk with someone else who can also give their opinion!
  • Is there a better option out there? Another thing to consider is whether or not there are other options out there that might be better suited for your needs than the one that caught your eye initially. While the first thing may be pretty or flashy, there could be something else that would work just as well, if not better, at a lower cost, so don’t be afraid.
  • Is there a warranty? If a product has a warranty, it’s made well enough to last for years. If not, then you can expect to either buy replacements or spend time fixing broken parts yourself.

Buying a product that doesn’t meet your needs can be frustrating and expensive. Before you buy, make sure you consider the following:

Price

This is probably the most important factor when buying 3d printer controllers. The price of a product is usually determined by its quality and brand name, but it can also depend on other factors, such as supply and demand in the market. The higher the demand, the higher the price for an item.

Quality

This refers to how durable an item is and whether or not it will last long enough for your needs. Quality products are more expensive than those not made well because they are more durable and will last longer without needing maintenance or repairs.

Durability

Look at reviews from other customers to see how long the 3d printer controllers has lasted, especially if it’s something like 3d printer controllers that will often be used over time. Ask yourself whether it’s worth paying more for something durable rather than replacing it after just a few months or years of use because it broke down quickly or was cheaply made from low-quality materials that failed unexpectedly.

Check user reviews

A great way to get unbiased opinions about 3d printer controllers is by reading reviews from other consumers who have bought them. User reviews are an excellent source of information because they’re written by people who use the product, not just someone trying to sell it to you. They also provide useful information about what to expect from a particular product, so you know whether or not it’s worth buying.

Know what you want

You can’t expect to find 3d printer controllers just by looking randomly around. You need to know what you’re after before you start shopping. Make a list of features, functions, and price ranges that match your needs, then shop around until you find something that matches your criteria.

Leave a Comment