10 Of The Best 100k Thermistor | Tested In Labs

There are many options when buying a 100k thermistor; some are more expensive than others, and some have better quality and used materials. All the information in this article is here to help you determine which 100k thermistor is the right one for you.

Since there is too much information regarding the 100k thermistor, we have created a table of products at the beginning of the article to help you decide which products are the best based on our research. The multi-purpose functionality they made is great and easy to use, and unique and advanced features can also be explored if you are interested. We hope that by reading this buyer’s guide, you’ll find it easier to locate the right 100k thermistor for your requirements!

How We Choose Our Products

We started by determining that the best 100k thermistor would have to be comfortable and easy to use. We also wanted them to have long-lasting materials and an ergonomic design that was easy to hold. We also looked for products that were easy to clean, as you’ll probably want to clean them after each use. We considered these factors when choosing our top picks, so we’re confident in their durability and effectiveness.

After we had our list of criteria down, we started looking at each product individually and evaluating it based on these factors. We reviewed the website for each product, read customer reviews and ratings, and looked at any other information they had posted online.

Once we had all of this information compiled, we could determine which 100k thermistor would make good choices for people shopping for new products in this category.

Check out our pick of the best 100k thermistor

Top 10 Best 100k thermistor Reviews And Specifications

If you’re looking for the best 100k thermistor, you’re in luck. We’ve tested and reviewed some of the best 100k thermistor on the market to help make your buying decision easier.

In this article, we are going to tell you about the 10 best 100k thermistor available on amazon and why they are so popular.

So let’s start with our top 10 best 100k thermistor list:

Bestseller No. 1
Creality 3D Printer NTC Thermistor Temp Sensor 100K for Creality Ender 3/Ender 3 Pro/Ender 3 Neo/Voxelab Aquila (1m/39.4inch)
  • After-sales Service: If you have any unsolvable problems during using this product, please feel free to contact us. Our after-sales technical team will provide you with detailed solutions within 24 hours.
  • Used for heated bed or hot end.
  • It has 2 pins female connector.
  • Note: Not fit for Ender 3 V2/Ender 3 MAX/Ender-3 Max Neo/CR-10S Pro V2/CR-10S Pro/Ender 2 Pro/Ender 6/Prusa i3 3D Printer. Please measure the length of your 3d printer's thermistor and confirm whether this thermistor is compatible with yours before buying.
  • Wire Length: 45.27-46.85inch /1.15-1.19m. Package includes 5 thermistors.
Bestseller No. 2
HiLetgo 10pcs 3D Printer NTC Thermistor 100 K Accuracy 1% B Value Temperature Sensor 3D Printer Parts
  • Name: 100K ohm NTC 3950 Thermistors
  • B value: B = 3950 ± 1%
  • Resistance value: R (25 ° C) = 100K ± 1%
Bestseller No. 3
HICTOP 100K ohm NTC 3950 Thermistors/Temp Sensor for Reprap Creality Ender 3, Ender 3 Pro, CR-10 10S 3D Printer (Pack of 5) (1m/39.4inches)
  • HICTOP 3d printer thermistor can be used on both of the heated bed and the extruder for 3d printers
  • Recommended parameters for the thermistor: R25℃=100K B25/50=3950K± 1%
  • The thermisor is compatible with most 3D printers in the market such as ender3, ender3 pro, ender3 V2, CR-10, hictop d3 hero etc
  • Wire length for the thermistor: 1m/39.4 inches
  • There is a 2 pin female connector on the thermistor for 3D printer
Bestseller No. 4
FYSETC 3Pcs Upgrade HT-NTC100K Thermistor with Cable 2m/6.56 Ft 3x15 3950 XH2.54 2Pin, High Temperature +250 Degrees Compatible with Ender 3/V2 CR10 A8 Make-r Pro Hot End Heater Block
  • Temperature measurement head cylinder diameter 3mm, length 15mm, The connector is 2pin XH2.54, so make sure your heater block is the right hole, the board Connection terminal is the right type, can be used with the heating block that support the thermocouple.
  • Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement.
  • The temperature measurement: -50 °C ~ +250 °C, can replace the original K-type thermocouple temperature, very fit for printing high-temperature filament.
  • Upgrade HT-NTC100K Thermistor: package temperature measurement. Negative Temperature Coefficient (NTC) Thermistor Model: B3950. The length of cable is 2m/78.7inch.
  • HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.
Bestseller No. 5
Upgrade M3 Hex Screw in Fixing Thermistor 100K 3950 Temperature Sensor for Ender 3 V2 Pro CR10 and Other 3D Printer Extruder Hotend (100K 3950)
  • M3 screw for installation is Quik and Durable, Flexible and Long Lasting, longer life span
  • DIY players can also modify BLOCK by themselves. Make an M3 threaded hole in BLCOK, then you can use this thermistor
  • For the printer which uses NTC 100K 3950 thermistor, Then this thermistor is plug and use
  • Thermistor model: NTC 100K 3950. HERE is the firmware setting: *13:100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " &"Hotend "All In ONE" #define TEMP_SENSOR_0 13
  • Package: 1piece m3 screw in thermistor
Bestseller No. 6
WINSINN HT-NTC100K Thermistor Sensor, Ender 3 v2 Upgrade 3x15 3950 XH2.54 2Pin, Compatible with Ender 3 5 Pro CR6 CR10 Series 3D Printer Hotend (Pack of 5Pcs)
  • ✔️HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.
  • ✔️Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement.
  • ✔️Upgrade HT-NTC100K Thermistor: package temperature measurement. Head diameter: 3mm, Head length: 15mm
  • ✔️The temperature measurement: -50 °C ~ +350 °C, can replace the original K-type thermocouple temperature. Fit for printing high-temperature filament.
  • ✔️Made by WINSINN. Can be used with the New Sensor Heater Block (Temperature measurement can be up to 350 degrees).
Bestseller No. 7
GODSHARK 5pcs NTC 3950 100K Thermistors Sensors with 1 Meter Wiring and Female Pin Head for RepRap 3D Printer Heatbed or Hot End
  • Thermistor Color: White, temperature sensor 100KΩ accuracy of ± 1%
  • Thermistor temperature measurement is stable. The temperature measurement of the upgraded NTC100K can be up to 300 degrees. It helps much to solve the issues of strict requirements of K-type thermocouple wiring, and the line is long which is susceptible to get external interference and result in temperature fluctuation that can affect the printing quality.
  • Conveniently pre-wired with 1 meter long high temperature PTFE insulated wiring, work with heated bed or extruder.
Bestseller No. 8
FYSETC 3Pcs Upgrade HT-NTC100K 3950 XH2.54 2 Pin Cartridge Thermistor Sensor, Ender 3 V2 Hotend Parts, High Temperature 250 Degrees for Ender 3 5 Pro CR10 A8 Maker Pro Heater Block
  • Not fit for CR-6 SE heater block.
  • Upgrade HT-NTC100K 3950 Thermistor: Pack of 3Pcs. Note: Temperature measurement head cylinder diameter is 3mm, length 15mm, The connector is 2pin XH2.54, so make sure your heater block is the right hole, the board Connection terminal is the right type, can be used with the heating block that support the thermocouple.
  • Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement. If need a longer one, please search our 2m thermistor (Asin:B09WMRW8HC).
  • HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.
  • The temperature measurement: -20 °C ~ +250 °C for a longer lifecycle, sometimes can reach +300℃(but not recommand to use it long time)can replace the original K-type thermocouple temperature, very fit for printing high-temperature filament.
SaleBestseller No. 9
3D Printer NTC Thermistor, 6-Pack 3950 100K Ohm Thermistor Temp Sensor Replacement for Creality Ender 3 5 Pro CR6 CR10S Series 3D Printer Hotend, Wiring 1m/39.4inches 2Pin XH2.54
  • 【After-sale Service】We provide product warranty or return and exchange service. If the product you receive is missing or there is a problem during the installation process, please contact us in time, and we will give you a satisfactory answer. Happy shopping
  • 【Temperature Check】NTC100K thermistor can measure the temperature change from -40℃ to +300℃, Temperature sensor 100KΩ accuracy ± 1%, Recommended parameters: R25℃=100K B25/50=3950K± 1%
  • 【Package Included】3D printer thermistor kit contains 6 1m NTC100K thermistors. For the convenience of customers, the wires are connected by wire, and customers can cut and weld according to their needs
  • 【Compatible Model】NTC 3950 100K thermistor cable is 1 meter/39.4 inches long, the connector is 2pin XH2.54, compatible with most 3D printers in the market, such as Creality ender3, 3X, 3 pro, ender3 V2, ender5, ender5 Pro , Creative CR6, CR10, 10S, Pro, etc
  • 【Product Function】3D printer thermistor can be used for the heating bed or extruder hotend, which can accurately monitor temperature changes, avoid excessive temperature fluctuations affecting the printing effect, and ensure the safety of 3D printing work

Things to Keep in Mind When Buying 100k thermistor

Choosing the right 100k thermistor is a big decision and should be made carefully. To help you make this important decision, here are some things to keep in mind:

  • Size: You need to consider how much space your home has and what size of 100k thermistor would fit well there. If you live in an apartment or condo, you may want to choose a smaller one that doesn’t take up too much space. However, if you have a large family, getting a larger 100k thermistor is necessary for everyone to enjoy it.
  • Quality: Look for quality construction when purchasing one. A sturdy frame and durable parts ensure that it will last longer than cheaper models that break easily or get damaged easily over time from regular use.
  • Costs: The cost of these 100k thermistor varies widely depending on the model, brand, features and other factors like whether it’s new or used (if buying secondhand). 
  • Research: The best way to shop for one of these machines is by doing research online first so you know what types are available at different price points before going out shopping in person where they might not be displayed prominently next to each other, so it’s easy to compare them side by side. 
  • Budget: It’s also important to know your budget before purchasing so you’re not surprised when the price of a particular model is higher than what you were expecting.

Buying a 100k thermistor is not as simple as going to the local store and picking one out. There are many things to consider, including price, size and style.

Price

All 100k thermistor are not created equal. The cost of a 100k thermistor depends on several factors, including materials and design. If you are looking for a high-quality 100k thermistor, you will have to pay more than if you were buying a cheap one. If price is your primary concern, choosing the cheapest option is best. 

If you’re looking for something that will last forever, you may want to invest in one made from precious metals. However, if you don’t have much money but still want something nice, look at other options.

Design 

You’ll also want to consider the design of your new 100k thermistor. There are many different styles available, so you’ll want to choose one that suits your taste. Some people prefer simple designs while others like more ornate ones. If you’re unsure which design is right for you, look at pictures of other pieces from the same brand or designer before making a purchase decision. 

Materials  

You should also consider the materials used to create your new 100k thermistor. Precious metals are popular choices because they’re durable and long-lasting. However, they can be expensive and may not be the best choice if you’re on a tight budget. You should also consider the weight of your new piece before making a purchase decision. 

Size

This is a significant factor when choosing your 100k thermistor. It needs to be big enough for your needs but not too big that it takes up too much space in your home or office. You also need to consider whether you want a portable 100k thermistor or one that stays in one place all the time. If you want something that can be moved around easily then look for one with wheels and handles so it can be easily transported from place to place without any problems.

Brand name

When looking for a good brand name for your 100k thermistor, ensure that it comes with all the necessary accessories, such as any issues when setting up your new product. That there will not be any issues when setting up your new product. The brand name should also be well known in this industry and have a good reputation for producing quality products that are durable and easy to use. This will ensure you get the best value for money when buying your 100k thermistor.

Style and design

If you want style, you have many choices of 100k thermistor. They come in different colours and designs so you can choose depending on your preference. If you want something more traditional, then durable materials will be good options because they look classy. Still, they can also be expensive compared to other materials that are cheaper but more modern.

Maintenance costs

You should also think about how much maintenance will cost over time, as this will affect its overall price, especially if it is a more expensive type of material. If it’s easy to maintain, you don’t have to spend too much time and money on maintaining it; however, if it’s difficult, you may need more professional help or even pay them more for their services.

Leave a Comment